Tonearms
At the present time Moth/OEM tonearms are unavailable!
All hand made British tonearms by 'you know who' but with Moth logo and huge savings!
Rega/Moth RB220 (Latest Type)
This is the latest version of the famous RB250 with even better tolerances with the bearings, improved anti-skate setting which is not available with the Rega badged version and cleaner looking lines. Truly the best budget tonearm on the market. $
Rega/Moth RB220 Cardas Wired
Same as above but internally wired with Cardas wire, Cardas cartridge tags and upgraded low capacitance external cable as found on the new RB330. $
Rega/Moth RB220 Incognito Wired
Same as above but with the famous one piece from Cardas cartridge tags to RCA plugs Incognito kit already installed. $
Rega/Moth RB330 (Latest Type)
Brand new, latest type made using the new casting machine which just like the new RB880 has a better, stronger bearing housing and much better finish to the arm tube. This is the 3rd generation based on the famed RB300 but with a 3 point mounting for better stability and is also lighter, this is important on sprung tables such as Linn etc. It now comes with much improved wiring and RCA plugs. $
Rega/Moth RB330 Cardas Wired/Cardas Cartridge Tags
Same arm as above but with internally wired with the famous high quality Cardas wire and Cardas high quality Cardas cartridge tags. This version retains the existing high quality external cable. A dedicated ground wire can be added on request at no additional charge. $
Rega/Moth RB330 Incognito Wired
Same arm as above but with the famous one piece from Cardas cartridge tags to high quality RCA plugs, Incognito kit is already installed which comes with a dedicated ground wire as standard. $
Rega/Moth RB880 (Latest Type)
The RB880 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Moth OEM tonearms each one is meticulously hand built by a team of highly skilled technicians. The RB880 has improved bearings and a tightened spindle fit tolerance over previous models (each bearing is individually selected to find the perfect match for the chosen spindle). This is a proven method of increasing the amount of detail retrieved from the record surface. $
Rega/Moth RB880 Internally Cardas Wired/Cardas Cartridge Tags
Same arm as above but internally rewire with high quality Cardas wire and Cardas cartridge tags. External cable is retained. $
Rega/Moth RB880 Incognito Wired
Same as above but with the famous one piece from Cardas cartridge tags to high quality RCA plugs, Incognito rewire kit already installed which comes with a dedicated ground wire. $
Rega/Moth RB3000 Tonearm (Latest type)
This is the latest tonearm from Rega in the UK which is installed as standard on their flagship turntable the Planar 10.
Rega is renowned for the quality of its tonearm bearing assemblies. In particular the accurate manufacturing of our bearing housing and bearing spindles. Technical characteristics such as "roundness" and "parallelity" are critical. Over the past three years Rega has found a new manufacturing process which improves on all these characteristics resulting in a micron perfect bearing fit. The RB3000 is the first Rega arm to benefit from these improvements. The entire tonearm structure is designed to have the minimum of mechanical joints while using the stiffest materials in all critical areas. The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction. Our latest low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 10 turntable. The RB3000 tonearm uses our advanced, preloaded zero tolerance bearing assembly adjusted to less than 1000th of a mm. This gives friction free movement and zero levels of unwanted play. Simply put, friction free bearings with no play enable ridges in the record groove of less than a micron to be read. The RB3000 also uses our latest award-winning, aluminium, Rega arm tube (each one of which is meticulously hand polished, keeping mass to an absolute minimum) which was redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further. $
Rega/Moth RB3000 Incognito Wired
Same as above but with the superb Incognito rewire kit already installed. $
Britaudio